Skip to content

How to Check and Adjust a Loose Headset

Fix the knock in your steering.

By Medell. Editorial2 min read
Mechanic working on a bicycle wheel
Igor Peftiev / Unsplash

Before you start

Difficulty
Intermediate
Estimated time
15 min

Tools required

  • •Hex keys (usually 4 and 5 mm)
  • •Torque wrench

Safety

  • •Always re-tighten stem bolts to the specified torque before riding.
  • •A loose stem is dangerous; never ride with loose stem bolts.

The headset holds the fork in the frame and lets it steer. When it loosens, you may feel a knock under braking or hear a clunk over bumps.

Check for play

  1. 01

    Hold the front brake

    Stand beside the bike and squeeze the front brake.

  2. 02

    Rock the bike

    Rock the bike forward and back while resting your other hand around the gap between the fork crown and the frame.

  3. 03

    Feel for a knock

    Any movement or click means the headset needs adjusting.

Adjust a threadless headset

  1. 01

    Loosen the stem bolts

    Loosen the bolts that clamp the stem to the steerer tube.

  2. 02

    Tighten the top cap gently

    Turn the top cap bolt a small amount at a time until the play disappears. It only sets bearing preload; do not overtighten.

  3. 03

    Align the stem

    Line up the stem with the front wheel.

  4. 04

    Re-tighten the stem bolts

    Tighten evenly to the torque printed on the stem.

  5. 05

    Check steering

    Lift the front wheel and turn the bars. They should move smoothly with no tight spots.

Frequently asked questions

How tight should the top cap be?

Only tight enough to remove play. The top cap sets bearing preload; it does not hold the stem in place. The stem bolts do that.

Can a loose headset damage the frame?

Riding with a loose headset for a long time can damage bearings and bearing seats. Fix play as soon as you notice it.

What if the headset still knocks after adjusting?

Check the thru-axle, brake mounts and fork for play. If those are fine, the headset bearings may be worn.

Up next · 2 min readThe 2-Minute Pre-Ride Bike Safety Check →

The Medell. Letter

New rides, workshop guides and reviews, in your inbox.

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

Troubleshooting

The 2-Minute Pre-Ride Bike Safety Check

Air, brakes, chain, quick releases and a final look-over. A simple pre-ride routine that catches most problems before they leave you stranded.

Beginner2 min job
Troubleshooting

How to Fix a Squeaky, Clicking or Creaking Bike

Squeaks, clicks and creaks usually point to a handful of causes. A troubleshooting guide to the most common bike noises and how to fix them.

Intermediate30 min job
Troubleshooting

How to Wash Your Bike (Without Damaging It)

Road grime and rain wear parts out fast. A safe, step-by-step bike washing routine that protects bearings, brakes and the drivetrain.

Beginner30 min job

The Medell. Letter · Free

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

  1. 01One workshop fixA repair you can do this weekend, with tools and time listed.
  2. 02One road worth ridingRoutes and rides from around the islands.
  3. 03Gear notes, honestly labelledHands-on or research-based, always said up front.