Skip to content

The 2-Minute Pre-Ride Bike Safety Check

The ABC check every rider should know.

By Medell. Editorial2 min read
Black road bike leaning against a brick wall
Ansis Kančs / Unsplash

Before you start

Difficulty
Beginner
Estimated time
2 min

Tools required

  • •Floor pump with gauge

Safety

  • •If anything feels loose or brakes feel soft, do not ride until it is fixed.

Most roadside problems give a warning before the ride. A short, consistent routine catches loose parts, soft tires and worn brakes while you are still at home.

A is for air

Check tire pressure with a gauge and inflate within the range printed on the tire. Look for cuts, bulges or embedded glass.

B is for brakes

Squeeze both levers. They should feel firm and stop well before touching the handlebar. Roll the bike forward and check each brake stops the wheel.

C is for chain and cranks

Spin the cranks backwards. The chain should run quietly. Grab both crank arms and push side to side to feel for play in the bottom bracket.

Quick releases and thru-axles

Check both wheels are secured and quick-release levers are fully closed. A wheel that comes out while riding is dangerous.

Final check

  • Lift the bike a few centimetres and drop it: listen for rattles.
  • Check the handlebar is straight and tight.
  • Make sure lights are charged if you might ride after dark.

The weekly check

Once a week, or every few rides, go a little further than the pre-ride check:

  • Wipe the chain and re-lube if dry.
  • Inspect tires for cuts and embedded debris.
  • Check brake pad wear.
  • Check that key bolts (stem, handlebar, seatpost, bottle cages) are secure.
  • Spin each wheel and look for wobbles or brake rub.

Frequently asked questions

What should I do if the brakes feel soft before a ride?

Do not ride. Check pad wear and cable tension on mechanical brakes; on hydraulic brakes, a soft lever may need a bleed. See a mechanic if you are unsure.

How often should I check tire pressure?

Before every ride. Tires lose air gradually, and lightweight inner tubes and tubeless setups can lose it faster.

Up next · 2 min readHow to Wash Your Bike (Without Damaging It) →

The Medell. Letter

New rides, workshop guides and reviews, in your inbox.

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

Troubleshooting

How to Wash Your Bike (Without Damaging It)

Road grime and rain wear parts out fast. A safe, step-by-step bike washing routine that protects bearings, brakes and the drivetrain.

Beginner30 min job
Troubleshooting

How to Check and Adjust a Loose Headset

A clunk when you brake or a wobble in the steering often means a loose headset. How to check for play and adjust a threadless headset.

Intermediate15 min job
Troubleshooting

How to Fix a Squeaky, Clicking or Creaking Bike

Squeaks, clicks and creaks usually point to a handful of causes. A troubleshooting guide to the most common bike noises and how to fix them.

Intermediate30 min job

The Medell. Letter · Free

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

  1. 01One workshop fixA repair you can do this weekend, with tools and time listed.
  2. 02One road worth ridingRoutes and rides from around the islands.
  3. 03Gear notes, honestly labelledHands-on or research-based, always said up front.