Skip to content

How to Wash Your Bike (Without Damaging It)

A full clean in 30 minutes, especially after rain.

By Medell. Editorial2 min read
Person cleaning a bicycle outdoors
Yazid N / Unsplash

Before you start

Difficulty
Beginner
Estimated time
30 min

Tools required

  • •Bucket of water and bike-safe soap
  • •Soft brushes and a sponge
  • •Degreaser for the drivetrain
  • •Clean rags
  • •Chain lube

Safety

  • •Keep degreaser and soap residue away from disc rotors and pads.
  • •Avoid pressure washers: they push water into bearings.

A regular wash keeps your bike running smoothly and lets you spot cracks, worn parts and loose bolts early.

  1. 01

    Rinse gently

    Use a low-pressure hose or bucket to loosen dirt. Never aim a pressure washer at hubs, the headset or the bottom bracket.

  2. 02

    Degrease the drivetrain

    Apply degreaser to the chain, cassette and chainrings. Scrub with a brush, then rinse.

  3. 03

    Wash the frame and wheels

    Work from top to bottom with soapy water and a soft sponge.

  4. 04

    Rinse and dry

    Rinse off the soap and dry with a clean rag. Bounce the bike to shake water out.

  5. 05

    Lube the chain

    Once the chain is dry, apply lube and wipe off the excess.

For chain care in more detail, see how to clean and lube a bicycle chain.

How often to wash your bike

Wash it whenever it is visibly dirty, and after every wet or muddy ride. In the rainy season that may be weekly. In dry weather a quick wipe-down and chain clean can be enough between full washes.

Frequently asked questions

Can I use dish soap to wash my bike?

Diluted, mild soap can work in a pinch, but rinse thoroughly. Bike-specific cleaners are designed to be safe on seals, paint and brake components.

Is it OK to use a car wash pressure hose?

Avoid it. High pressure forces water past seals into bearings in the hubs, headset and bottom bracket.

How should I dry my bike?

Bounce it to shake off water, then dry with a clean cloth. Leave it somewhere airy before storing, and lube the chain once it is dry.

Up next · 2 min readThe 2-Minute Pre-Ride Bike Safety Check →

The Medell. Letter

New rides, workshop guides and reviews, in your inbox.

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

Troubleshooting

The 2-Minute Pre-Ride Bike Safety Check

Air, brakes, chain, quick releases and a final look-over. A simple pre-ride routine that catches most problems before they leave you stranded.

Beginner2 min job
Troubleshooting

How to Fix a Squeaky, Clicking or Creaking Bike

Squeaks, clicks and creaks usually point to a handful of causes. A troubleshooting guide to the most common bike noises and how to fix them.

Intermediate30 min job
Troubleshooting

How to Check and Adjust a Loose Headset

A clunk when you brake or a wobble in the steering often means a loose headset. How to check for play and adjust a threadless headset.

Intermediate15 min job

The Medell. Letter · Free

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

  1. 01One workshop fixA repair you can do this weekend, with tools and time listed.
  2. 02One road worth ridingRoutes and rides from around the islands.
  3. 03Gear notes, honestly labelledHands-on or research-based, always said up front.