Skip to content

Fixing a Flat at the Roadside

Tube replacement, step by step, and how to avoid an instant second puncture.

By Medell. Editorial2 min read
Person holding a bicycle tire
Anton Savinov / Unsplash

Before you start

Difficulty
Beginner
Estimated time
15 min

Tools required

  • •Spare tube of the correct size and valve type
  • •Two tire levers
  • •Mini pump or CO2 inflator
  • •Patch kit (backup)

Safety

  • •Move completely off the road before starting.
  • •Be careful with CO2 cartridges; they get extremely cold when discharged.

Check the tire sidewall for its size (for example 700x28c) and make sure your spare tube matches it and your rim's valve type: Presta or Schrader.

  1. 01

    Remove the wheel

    Shift to the smallest cog first if it is the rear wheel. Open the brake if you have rim brakes.

  2. 02

    Unseat one side of the tire

    Deflate fully, push the bead into the rim's centre channel, then use levers to lift one side of the tire off.

  3. 03

    Find the cause

    Run your fingers carefully around the inside of the tire to find glass, wire or thorns. Skipping this step is the most common cause of a second flat.

  4. 04

    Fit the new tube

    Inflate it slightly so it holds its shape, insert the valve, then tuck the tube inside the tire.

  5. 05

    Reseat the tire by hand

    Work from the valve outwards. Use levers only if necessary and avoid pinching the tube.

  6. 06

    Inflate and check

    Inflate to the pressure printed on the sidewall range and check the bead sits evenly on both sides.

How to prevent the next flat

  • Keep tires at the correct pressure; under-inflated tires pinch-flat more easily.
  • Check tread for embedded glass and wire after rides, especially after rain.
  • Replace tires when the tread is worn flat or the casing shows through.
  • Consider puncture-resistant tires or a tubeless setup if flats are frequent.

Frequently asked questions

Should I patch the tube or replace it?

At the roadside, fitting a new tube is quicker. Patch the punctured tube at home and carry it as your next spare; a well-applied patch is reliable.

How do I find a tiny hole?

Inflate the tube and listen or feel for escaping air. If you cannot find it, submerge the tube in water and look for bubbles.

Can I ride on a flat tire to get home?

Avoid it. Riding on a flat can damage the tire, the rim and the tube, and handling is poor. Walk the bike or fix it first.

Up next · 2 min readHow to True a Bike Wheel →

The Medell. Letter

New rides, workshop guides and reviews, in your inbox.

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

Wheels & Tires

How to True a Bike Wheel

A wobbly wheel rubs the brakes and rides badly. How spoke tension moves the rim, and how to fix a small side-to-side wobble at home.

Advanced40 min job
Wheels & Tires

How to Set Up Tubeless Tires

A step-by-step guide to converting tubeless-ready wheels and tires: taping the rim, installing valves, adding sealant and seating the bead.

Intermediate45 min job
Troubleshooting

The 2-Minute Pre-Ride Bike Safety Check

Air, brakes, chain, quick releases and a final look-over. A simple pre-ride routine that catches most problems before they leave you stranded.

Beginner2 min job

The Medell. Letter · Free

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

  1. 01One workshop fixA repair you can do this weekend, with tools and time listed.
  2. 02One road worth ridingRoutes and rides from around the islands.
  3. 03Gear notes, honestly labelledHands-on or research-based, always said up front.