Skip to content

How to True a Bike Wheel

Fix a small wobble with a spoke wrench.

By Medell. Editorial2 min read
Close-up of bicycle wheel spokes
Clint McKoy / Unsplash

Before you start

Difficulty
Advanced
Estimated time
40 min

Tools required

  • •Spoke wrench in the correct size
  • •Truing stand, or the bike's frame and a zip tie as a guide

Safety

  • •Large wobbles, broken spokes or a bent rim need a professional wheel builder.
  • •Make small changes; too much tension can damage the rim.

Truing fixes small lateral (side-to-side) wobbles. Bigger problems, such as a dented rim or many loose spokes, are best left to a shop.

How spokes move the rim

Each spoke pulls the rim toward the side of the hub it connects to. Tightening a spoke pulls that section of rim toward its hub flange; loosening it lets the rim move away.

  1. 01

    Find the wobble

    Spin the wheel and watch the gap between the rim and a fixed reference point. Mark where the rim moves toward it.

  2. 02

    Identify the spokes

    At the marked spot, find the spokes that run to the opposite hub flange.

  3. 03

    Adjust in small steps

    Tighten those spokes a quarter turn at a time, or loosen the neighbouring ones on the near side.

  4. 04

    Re-check

    Spin again. Repeat until the wobble is within a millimetre or so.

  5. 05

    Check tension

    Squeeze pairs of spokes. None should feel noticeably looser than the others.

Lateral true versus radial true

Lateral truing fixes side-to-side wobble, which is what most riders notice as brake rub. Radial truing fixes up-and-down hops, where the rim is not perfectly round. Radial problems are harder to fix well and are a good reason to visit a wheel builder.

Frequently asked questions

Can I true a wheel without a truing stand?

Yes, for small corrections. Leave the wheel in the bike and use a brake pad or a zip tie on the frame as a reference point.

Why did my wheel go out of true?

Impacts from potholes, uneven spoke tension and spokes loosening over time are common causes.

When is a wheel beyond truing?

A dented or cracked rim, a large bend after a crash, or several broken spokes usually need professional repair or a new rim.

Up next · 2 min readFixing a Flat at the Roadside →

The Medell. Letter

New rides, workshop guides and reviews, in your inbox.

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

Wheels & Tires

Fixing a Flat at the Roadside

Every rider should be able to replace an inner tube in under fifteen minutes. Here is the method, plus the small checks that prevent repeat flats.

Beginner15 min job
Wheels & Tires

How to Set Up Tubeless Tires

A step-by-step guide to converting tubeless-ready wheels and tires: taping the rim, installing valves, adding sealant and seating the bead.

Intermediate45 min job
Troubleshooting

The 2-Minute Pre-Ride Bike Safety Check

Air, brakes, chain, quick releases and a final look-over. A simple pre-ride routine that catches most problems before they leave you stranded.

Beginner2 min job

The Medell. Letter · Free

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

  1. 01One workshop fixA repair you can do this weekend, with tools and time listed.
  2. 02One road worth ridingRoutes and rides from around the islands.
  3. 03Gear notes, honestly labelledHands-on or research-based, always said up front.