Skip to content

How to Check Chain Wear and Know When to Replace Your Chain

The cheapest way to save your cassette.

By Medell. Editorial2 min read
Bicycle tools and parts on a workbench
Tom Conway / Unsplash

Before you start

Difficulty
Beginner
Estimated time
10 min

Tools required

  • •Chain wear checker or a steel ruler
  • •Rag

Safety

  • •Keep fingers clear of the chainrings when turning the cranks.

Chains do not literally stretch. The pins and rollers wear, which makes the distance between links grow. A worn chain then wears the cassette and chainrings to match it, which is far more expensive to fix.

Method 1: a chain checker

Drop the checker's tabs into the chain. Most checkers have 0.5% and 0.75% markers. Many mechanics replace chains at 0.5% on 11- and 12-speed drivetrains and by 0.75% on wider ones.

Method 2: a ruler

A new chain measures exactly 12 inches over 12 full links (24 pins apart). If the 24th pin sits about 1/16 inch (about 1.6 mm) past the 12-inch mark, the chain is worn and should be replaced.

WearWhat it meansAction
Under 0.5%HealthyKeep riding, check monthly
0.5%Worn on modern drivetrainsReplace chain soon
0.75% or moreHeavily wornReplace chain; cassette may also need replacing

Why replacing early saves money

A new chain on a worn cassette often skips under load. Replacing chains on time can let one cassette last through several chains.

Frequently asked questions

How long does a bike chain last?

It varies widely with conditions, cleaning habits, drivetrain type and riding style. That is why measuring wear is more reliable than counting kilometres.

If my chain is worn, do I also need a new cassette?

Not always. If the chain was replaced around 0.5% wear, the cassette usually survives. If it was ridden well past 0.75%, a new chain may skip on the old cassette, and both need replacing.

Are cheap chain checkers accurate?

Simple drop-in checkers are a quick guide but can over-read slightly. Measuring with a steel ruler over 12 inches gives a good cross-check.

Up next · 3 min readHow to Clean and Lube a Bicycle Chain →

The Medell. Letter

New rides, workshop guides and reviews, in your inbox.

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

Drivetrain

How to Clean and Lube a Bicycle Chain

A clean, correctly lubricated chain shifts better, runs quieter and wears your cassette and chainrings more slowly. Here is the full routine.

Beginner20 min job
Drivetrain

How to Adjust a Front Derailleur

Chain dropping or not reaching the big ring? A step-by-step guide to setting front derailleur height, angle, limits and cable tension.

Intermediate30 min job

The Medell. Letter · Free

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

  1. 01One workshop fixA repair you can do this weekend, with tools and time listed.
  2. 02One road worth ridingRoutes and rides from around the islands.
  3. 03Gear notes, honestly labelledHands-on or research-based, always said up front.