How to Clean and Lube a Bicycle Chain
The twenty-minute job that makes every other ride better.
Before you start
- Difficulty
- Beginner
- Estimated time
- 20 min
- •Chain degreaser or citrus cleaner
- •Stiff brush or chain-cleaning tool
- •Clean, lint-free rags
- •Chain lube suited to your conditions
- •Chain wear checker (optional)
- •Gloves
- •Keep degreaser away from disc brake rotors and pads.
- •Work in a ventilated space and dispose of used degreaser responsibly.
Tools required
Safety
Dirt mixed with old lubricant forms a grinding paste that accelerates wear across the whole drivetrain. Cleaning and re-lubing the chain regularly is one of the most cost-effective things you can do for your bike.
Step by step
- 01
Check chain wear first
Use a chain checker. If the chain is worn past the manufacturer's limit, replace it instead, cleaning a worn chain will not restore it.
- 02
Apply degreaser
Shift to a middle gear. Apply degreaser along the chain while backpedalling, or use a chain-cleaning tool filled with cleaner.
- 03
Scrub
Brush the chain, cassette and chainrings. Pay attention to the jockey wheels on the rear derailleur, which collect a lot of grime.
- 04
Rinse and dry
Rinse with water at low pressure, then dry thoroughly with a rag. Let it air-dry completely; lube does not bond well to a wet chain.
- 05
Lubricate
Apply one drop of lube to each roller on the inside of the chain while slowly backpedalling.
- 06
Wipe off the excess
Wait a few minutes, then wipe the outside of the chain firmly. Lube belongs inside the rollers, not on the outer plates where it attracts dirt.
Wet or dry lube?
| Condition | Suggested lube | Notes |
|---|---|---|
| Dry, dusty roads | Dry lube | Attracts less dirt; reapply more often |
| Rain and wet roads | Wet lube | Resists wash-off; clean more thoroughly |
| Mixed conditions | All-round or wax-based | Follow the product instructions |
Whichever you use, a clean chain with a little lube always beats a dirty chain with a lot.
How often should you clean and lube?
There is no fixed schedule; conditions matter more than distance. A useful rule: lube when the chain looks dry or starts to sound noisy, and clean it whenever it looks black and gritty. After any ride in the rain, dry the chain and re-lube it the same day to prevent surface rust.
Frequently asked questions
Can I use WD-40 as chain lube?
The classic WD-40 spray is mainly a water displacer and cleaner, not a long-lasting chain lubricant. It can help remove water and grime, but follow it with a proper bicycle chain lube.
Do I need to remove the chain to clean it?
No. A brush and degreaser, or a clip-on chain-cleaning tool, works with the chain on the bike. Removing it is only worth doing for a deep clean or waxing, and requires a quick link.
Does a new chain need lubing?
New chains come with factory grease inside the rollers, which is a good lubricant. Many riders simply ride a new chain until it starts to look dry, then begin their normal lube routine.
The Medell. Letter
New rides, workshop guides and reviews, in your inbox.
Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.
Keep reading
How to Check Chain Wear and Know When to Replace Your Chain
A stretched chain wears your cassette and chainrings fast. How to measure chain wear with a checker or a ruler, and when to replace it.
Rear Derailleur Adjustment: Limit Screws, B-Tension and Indexing
Most shifting problems come down to three adjustments made in the correct sequence. Learn what each screw does before you turn it.
How to Adjust a Front Derailleur
Chain dropping or not reaching the big ring? A step-by-step guide to setting front derailleur height, angle, limits and cable tension.