Skip to content

How to Set Up a Bike Computer and Sensors

Mounting, pairing and calibrating.

By Medell. Editorial2 min read
Cyclist’s hand on the handlebar with a GPS map
Natalia Grela / Unsplash

Before you start

Difficulty
Beginner
Estimated time
20 min

Tools required

  • •Bike computer mount
  • •Sensors (speed, cadence, heart rate)
  • •Rubber bands or zip ties supplied with sensors

Safety

  • •Make sure magnets and sensors cannot touch moving spokes or cranks.
  1. 01

    Mount the computer

    Use an out-front or stem mount so the screen is visible without looking far down.

  2. 02

    Fit the sensors

    Speed sensors usually go on the front hub; cadence sensors on the inside of a crank arm.

  3. 03

    Wake and pair

    Spin the wheel and cranks to wake the sensors, then search for sensors in the computer's menu.

  4. 04

    Set wheel size

    Enter your wheel circumference, or let the computer calibrate it from GPS.

  5. 05

    Connect your apps

    Link your account (for example Strava) so rides upload automatically.

ANT+ or Bluetooth?

Many sensors support both. Bluetooth connects easily to phones; ANT+ can connect to several devices at once. Check which your computer supports.

Choosing a computer? Read what to look for in a bike computer.

Keep it working

  • Install firmware updates from the manufacturer; they often improve GPS, sensor connections and battery life.
  • Replace coin-cell batteries in sensors when readings drop out.
  • Charge your computer the night before long rides.
  • Download maps and routes before riding in areas with poor mobile signal.

Frequently asked questions

Do I need a speed sensor if my computer has GPS?

Not always. GPS speed works well outdoors. A speed sensor helps under tree cover, in tunnels and with indoor trainers.

Why does my sensor keep disconnecting?

Low battery, distance from the computer or interference are common causes. Replace the battery first, then re-pair.

Can I use my phone instead of a bike computer?

Yes, with a secure handlebar mount. Battery life, sunlight readability and weather resistance are the main drawbacks.

Up next · 2 min readHow to Set Your Saddle Height →

The Medell. Letter

New rides, workshop guides and reviews, in your inbox.

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

Component Installation

How to Set Your Saddle Height

Saddle height affects comfort, power and knee health. Simple methods to find a good starting height and fine-tune it.

Beginner15 min job
Component Installation

How to Install and Remove Bike Pedals

Pedals are easy to fit, as long as you know the left pedal has a reverse thread. How to remove and install pedals without damaging the cranks.

Beginner10 min job
Component Installation

How to Wrap Handlebar Tape

Fresh bar tape makes an old bike feel new. How to remove old tape and wrap new tape evenly, with a clean finish at the hoods and tops.

Beginner30 min job

The Medell. Letter · Free

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

  1. 01One workshop fixA repair you can do this weekend, with tools and time listed.
  2. 02One road worth ridingRoutes and rides from around the islands.
  3. 03Gear notes, honestly labelledHands-on or research-based, always said up front.