Skip to content

How to Wrap Handlebar Tape

A neat, comfortable wrap in 30 minutes.

By Medell. Editorial2 min read
Road bike handlebar against a dark background
Josh Nuttall / Unsplash

Before you start

Difficulty
Beginner
Estimated time
30 min

Tools required

  • •New bar tape kit (tape, finishing strips, bar-end plugs)
  • •Scissors
  • •Electrical tape
  • •Isopropyl alcohol

Safety

  • •Make sure bar-end plugs are fitted; open bar ends can cause injury in a crash.

Bar tape wears, fades and absorbs sweat. Replacing it is inexpensive and improves grip and comfort.

  1. 01

    Remove the old tape

    Pull off the bar-end plugs and unwrap the old tape. Clean adhesive residue with isopropyl alcohol.

  2. 02

    Secure the cables

    Make sure brake and gear housing are taped neatly along the bar.

  3. 03

    Start at the bar end

    Begin at the end of the drop, with the tape overhanging the end by about half its width.

  4. 04

    Wrap toward the stem

    Wrap so the tape moves outward over the top of the bar. This way your grip tightens the wrap instead of loosening it. Overlap each turn by about a third.

  5. 05

    Cover the hoods

    Fold back the hood rubber. Use the short strips supplied, or a figure-eight wrap, to cover the gap around the lever clamp.

  6. 06

    Finish on the tops

    Stop where the bar widens near the stem, cut the tape at an angle for a neat line, and secure it with finishing tape.

  7. 07

    Fit the plugs

    Tuck the overhang into the bar end and press in the bar-end plugs.

Frequently asked questions

How often should bar tape be replaced?

Replace it when it is torn, compressed, slippery or no longer comfortable. Riders who sweat heavily may replace it more often.

Are gel pads under bar tape worth it?

They add cushioning for long rides or rough roads. Fit them before wrapping and check your hand position feels natural.

Which direction should I wrap?

Wrap so the tape moves outward over the top of the bar on each side. Your grip then tightens the wrap rather than unrolling it.

Up next · 2 min readHow to Set Your Saddle Height →

The Medell. Letter

New rides, workshop guides and reviews, in your inbox.

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

Component Installation

How to Set Your Saddle Height

Saddle height affects comfort, power and knee health. Simple methods to find a good starting height and fine-tune it.

Beginner15 min job
Component Installation

How to Install and Remove Bike Pedals

Pedals are easy to fit, as long as you know the left pedal has a reverse thread. How to remove and install pedals without damaging the cranks.

Beginner10 min job
Component Installation

How to Set Up a Bike Computer and Sensors

Mount your bike computer, pair speed, cadence and heart-rate sensors over ANT+ or Bluetooth, and set wheel size for accurate data.

Beginner20 min job

The Medell. Letter · Free

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

  1. 01One workshop fixA repair you can do this weekend, with tools and time listed.
  2. 02One road worth ridingRoutes and rides from around the islands.
  3. 03Gear notes, honestly labelledHands-on or research-based, always said up front.