Skip to content

Hydraulic Disc Brakes: Bleed or New Pads?

Read the symptoms before you open the system.

By Medell. Editorial2 min read
Close-up of a bicycle brake
Rafał Karoń / Unsplash

Before you start

Difficulty
Intermediate
Estimated time
45 min

Tools required

  • •Hex and Torx keys for your calipers
  • •Brake-specific bleed kit
  • •Correct fluid (mineral oil or DOT, never mix)
  • •Isopropyl alcohol and clean rags

Safety

  • •Use only the fluid type specified by your brake manufacturer.
  • •DOT fluid damages paint and skin; wear gloves.
  • •Test brakes at walking speed before riding.

Hydraulic brakes need little maintenance, but they do need the right maintenance. Use the table below to match the symptom to the likely cause.

SymptomLikely causeFirst step
Lever feels soft or pulls to the barAir in the systemBleed the brake
Squealing or grindingContaminated or worn padsInspect pad thickness and contamination
Rubbing rotorCaliper misaligned or bent rotorRe-centre the caliper
Power fades on long descentsOverheating or glazed padsCheck pad compound and rotor size

Checking pad wear

Remove the wheel and look at the pads. Most manufacturers recommend replacing pads when the friction material is worn down to around 0.5 mm, but check the specification for yours.

Caring for hydraulic brakes

  • Keep the system closed: do not squeeze the lever with the wheel out unless a pad spacer is fitted, or the pistons may push out too far.
  • Avoid storing or transporting the bike upside down for long periods, which can let air move toward the lever.
  • Check pads regularly; worn-out pads can damage rotors.

Frequently asked questions

How often should hydraulic brakes be bled?

Bleed them when the lever feels soft or inconsistent, or according to the manufacturer's service interval. Many riders have them bled during an annual service.

Can I mix mineral oil and DOT fluid?

Never. Brakes are designed for one fluid type only, and the wrong fluid damages the seals. The correct fluid is usually printed on the brake lever or caliper.

Why does my lever feel soft after travel?

Air in the system may have moved up toward the lever. Pumping the lever a few times can help; if it stays soft, the brake needs bleeding.

Up next · 2 min readHow to Check and Replace Bike Brake Pads →

The Medell. Letter

New rides, workshop guides and reviews, in your inbox.

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

Brakes

How to Check and Replace Bike Brake Pads

Worn brake pads are the most common brake problem, and the easiest to fix. How to tell when pads are worn and how to replace them on rim and disc brakes.

Beginner20 min job
Brakes

How to Adjust Mechanical Disc Brakes

Cable-operated disc brakes need regular adjustment as pads wear. How to centre the caliper, set pad clearance and tune cable tension.

Intermediate20 min job
Troubleshooting

The 2-Minute Pre-Ride Bike Safety Check

Air, brakes, chain, quick releases and a final look-over. A simple pre-ride routine that catches most problems before they leave you stranded.

Beginner2 min job

The Medell. Letter · Free

Free. Every two weeks, never daily. One-click unsubscribe. See our privacy policy.

  1. 01One workshop fixA repair you can do this weekend, with tools and time listed.
  2. 02One road worth ridingRoutes and rides from around the islands.
  3. 03Gear notes, honestly labelledHands-on or research-based, always said up front.